基于GPS和水准数据的微粒群算法联合反演祁连山北缘断裂三维滑动速率     

刘杰 《大地测量与地球动力学》2019,39(9):906-909

将微粒群算法与位错理论模型相结合，采用中国地壳运动观测网络提供的青藏高原地区2001~2004年GPS测量数据和2000~2006年水准测量数据，通过常规定权和附有相对权比的方法对祁连山北缘断裂的三维滑动速率进行联合反演，并与蚁群算法反演结果进行对比。结果表明，微粒群算法收敛速度快、稳定性高，结合经典位错理论模型，是一种可以有效求解断层三维滑动速率反演问题的优化算法，在大地测量反演领域极具应用潜力。  相似文献   

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method          下载免费PDF全文

Mozhen Zhou  Bingyin Zhang  Chong Peng 《国际地质力学数值与分析法杂志》2018,42(5):781-805

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.  相似文献   

重力数据约束的二维地震层析成像在台湾海峡南部的应用     

王笋  闫培  刘善虎 《大地测量与地球动力学》2019,39(3):302-306

地震-重力联合反演可以降低多解性，针对大勘探范围内岩石波速-密度关系存在较大散布的问题，引入交叉梯度结构约束构建统一的目标函数是一种有效的解决方案。利用台湾海峡南部HX-13测线进行验证：由于火成岩侵入体的存在，部分区域难以拾取可靠的地震初至，常规的走时反演无法准确恢复基底面的形态。搜集研究区的船测重力资料，根据地震地质条件和数据特点设置合适的反演参数，实现基于物性和结构双重约束的重力-地震联合反演。由对反演结果的分析和解释可以看出，该方法可在很大程度上弥补地震数据不完备的缺陷，使反演过程稳定，并提高模型的可靠性。  相似文献   

USE OF SEISMIC WAVEFORMS AND INSAR DATA FOR DETERMINATION OF THE SEISMOTECTONICS OF THE MAINLING M_S6.9 EARTHQUAKE ON NOV.18, 2017     

LIU Yun-hua  SHAN Xin-jian  ZHANG Ying-feng  ZHAO De-zheng  QU Chun-yan 《地震地质》2018,40(6):1254-1275

On November 18, 2017, a M_S6.9 earthquake struck Mainling County, Tibet, with a depth of 10km. The earthquake occurred at the eastern Himalaya syntaxis. The Namche Barwan moved northward relative to the Himalayan terrane and was subducted deeply beneath the Lhasa terrane, forming the eastern syntaxis after the collision of the Indian plate and Asian plates. Firstly, this paper uses the far and near field broadband seismic waveform for joint inversion (CAPJoint method)of the earthquake focal mechanism. Two groups of nodal planes are obtained after 1000 times Bootstrap test. The strike, dip and rake of the best solution are calculated to be 302°, 76° and 84° (the nodal plane Ⅰ)and 138°, 27° and 104° (the nodal plane Ⅱ), respectively. This event was captured by interferometric synthetic aperture radar (InSAR)measurements from the Sentinel-1A radar satellite, which provide the opportunity to determine the fault plane, as well as the co-seismic slip distribution, and assess the seismic hazards. The overall trend of the deformation field revealed by InSAR is consistent with the GPS displacement field released by the Gan Wei-Jun's team. Geodesy (InSAR and GPS)observation of the earthquake deformation field shows the northeastern side of the epicenter uplifting and the southwestern side sinking. According to geodetic measurements and the thrust characteristics of fault deformation field, we speculate that the nodal plane Ⅰ is the true rupture plane. Secondly, based on the focal mechanism, we use InSAR data as the constraint to invert for the fine slip distribution on the fault plane. Our best model suggests that the seismogenic fault is a NW-SE striking thrust fault with a high angle. Combined with the slip distribution and aftershocks, we suggest that the earthquake is a high-angle thrust event, which is caused by the NE-dipping thrust beneath the Namche Barwa syntaxis subducted deeply beneath the Lhasa terrane.  相似文献   

水文干旱多变量联合设计及水库影响评估   总被引：2，自引：1，他引：1  

涂新军  杜晓霞  杜奕良  陈晓宏  黎坤 《湖泊科学》2018,30(2):509-518

基于东江流域博罗站月径流数据,采用游程理论提取水文干旱事件.选用Meta-Gaussian Copula函数,统计模拟水文干旱指标的多变量联合分布.采用Kendall联合重现期和最大可能权函数,设计给定联合超越重现期的水文干旱指标组合值,并定量评估水库径流调节作用对水文干旱多变量联合特征的影响.结果表明:东江流域水文干旱历时、强度和峰值的统计优选分布均为韦布尔分布.干旱指标之间具有较高的正相关性,Meta-Gaussian Copula能够很好地模拟水文干旱指标两变量和三变量联合分布.基于任意两个变量联合设计和三变量联合设计,干旱指标设计组合值位于同频位置附近,且同一个干旱指标设计值在不同变量组合之间差别较小.水库径流调节作用对于缓解东江流域水文干旱效果明显,同一组干旱指标的多变量联合超越重现期在水库影响下明显变大.联合超越重现期越小,水库对联合设计值的影响程度越大.根据目前水库运行模式,若要满足河道内最小管理流量目标,联合超越重现期10 a一遇的干旱历时、强度和峰值依然达到了约3.89~4.04月、7.20~7.97亿m3和2.99~3.12亿m3.  相似文献   

Surficial fractures in the Navajo sandstone,south-western USA: the roles of thermal cycles,rainstorms, granular disintegration,and iterative cracking     

David B. Loope  Garrison R. Loope  Caroline M. Burberry  Clinton M. Rowe  Gerald C. Bryant 《地球表面变化过程与地形》2020,45(9):2063-2077

Deep (> 5 m) sheeting fractures in the Navajo sandstone are evident at numerous sites in southern Utah and derive from tectonic stresses. Strong diurnal thermal cycles are, however, the likely triggers for shallow (< 0.3 m) sheeting fractures. Data from subsurface thermal sensors reveal that large temperature differences between sensors at 2 and 15 cm depth on clear summer afternoons are as great as those that trigger sheeting fractures in exposed California granite. Extensive polygonal patterns in the Navajo sandstone are composed of surface-perpendicular fractures and were produced by contractile stresses. Numerous studies have shown that porewater diminishes the tensile strength of sandstone. Based on our thermal records, we propose that cooling during monsoonal rainstorms triggers polygonal fracturing of temporarily weakened rock. On steep outcrops, polygonal patterns are rectilinear and orthogonal, with T-vertices. Lower-angle slopes host hexagonal patterns (defined by the dominance of Y-vertices). Intermediate patterns with rectangles and hexagons of similar scale are common. We posit that outcropping fractures are advancing downward by iterative steps, and that hexagons on sandstone surfaces (like prismatic columns of basalt) have evolved from ancestral orthogonal polygons of similar scale. In lava flows, fractures elongate intermittently as they follow a steep thermal gradient (the source of stress) as it rapidly moves through the rock mass. In our model, a steep, surficial thermal gradient descends through unfractured sandstone, but at the slow pace of granular disintegration. Through time, as the friable rock on stable slopes erodes, iterative cracking advances into new space. Hexagonal patterns form as new fractures, imperfectly guided by the older ones, propagate in new directions, and vertices drift into a configuration that minimizes the ratio of fracture length to polygon area. © 2020 John Wiley & Sons, Ltd.  相似文献   

KK型管节点应力集中系数几何敏感性分析     

林海花  孙承猛  石强 《海洋工程》2020,38(6):142-150

KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。  相似文献   

RESEARCH ON THE CHARACTERISTICS OF QUATERNARY ACTIVITIES OF SU-XI-CHANG FAULT          下载免费PDF全文

ZHANG Peng  ZHANG Yuan-yuan  XU Han-gang  LIU Jian-da  CHEN Jian-qiang  LI Li-mei  LI Jin-liang  GU Qin-ping  JIANG Xin 《地震地质》2019,41(5):1172-1184

Running across the urban areas of Changzhou, Wuxi and Suzhou, the NW-trending Su-Xi-Chang Fault is an important buried fault in Yangtze River Delta. In the respect of structural geomorphology, hilly landform is developed along the southwest side of the Su-Xi-Chang Fault, and a series of lakes and relatively low-lying depressions are developed on its northeast side, which is an important landform and neotectonic boundary line. The fault controlled the Jurassic and Cretaceous stratigraphic sedimentary and Cenozoic volcanic activities, and also has obvious control effects on the modern geomorphology and Quaternary stratigraphic distribution. Su-Xi-Chang Fault is one of the target faults of the project "Urban active fault exploration and seismic risk assessment in Changzhou City" and "Urban active fault exploration and seismic risk assessment in Suzhou City". Hidden in the ground with thick cover layer, few researches have been done on this fault in the past. The study on the activity characteristics and the latest activity era of the Su-Xi-Chang Fault is of great significance for the prevention and reduction of earthquake disaster losses caused by the destructive earthquakes to the cities of Changzhou, Wuxi and Suzhou. Based on shallow seismic exploration and drilling joint profiling method, Quaternary activities and distribution characteristics of the Su-Xi-Chang Fault are analyzed systematically. Shallow seismic exploration results show that the south branch of the Su-Xi-Chang Fault in Suzhou area is dominated by normal faulting, dipping to the north-east, with a dip angle of about 60° and a displacement of 3~5m on the bedrock surface. The north branch of the Su-Xi-Chang Fault in Changzhou area is dominated by normal faulting, dipping to the south, with a dip angle of about 55°~70° and a displacement of 4~12m on the bedrock surface. All breakpoints of Su-Xi-Chang Fault on the seismic exploration profiles show that only the bedrock surface was dislocated, not the interior strata of the Quaternary. On the drilling joint profile in the Dongqiao site of Suzhou, the latest activity of the south branch of Su-Xi-Chang Fault is manifested as reverse faulting, with maximum displacement of 2.9m in the upper part of Lower Pleistocene, and the Middle Pleistocene has not been dislocated by the fault. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 3.7m in the Neogene stratum. On the drilling joint profile in the Chaoyang Road site of Changzhou, the latest activity of the north branch of Su-Xi-Chang Fault is manifested as reverse faulting too, with maximum displacement of 2.8m in the bottom layer of the Middle Pleistocene. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 10.2m in the bedrock surface. Combining the above results, we conclude that the latest activity era of Su-Xi-Chang Fault is early Middle Pleistocene. The Su-Xi-Chang Fault was dominated by the sinistral normal faulting in the pre-Quaternary period, and turned into sinistral reverse faulting after the early Pleistocene, with displacement of about 3m in the Quaternary strata. The maximum magnitude of potential earthquake on the Su-Xi-Chang Fault is estimated to be 6.0.  相似文献   

Detecting arbitrarily shaped clusters in origin-destination flows using ant colony optimization     

Ci Song  Ting Ma  Yunyan Du  Hua Shu  Sihui Guo 《International journal of geographical information science》2019,33(1):134-154

An origin-destination (OD) flow can be defined as the movement of objects between two locations. These movements must be determined for a range of purposes, and strong interactions can be visually represented via clustering of OD flows. Identification of such clusters may be useful in urban planning, traffic planning and logistics management research. However, few methods can identify arbitrarily shaped flow clusters. Here, we present a spatial scan statistical approach based on ant colony optimization (ACO) for detecting arbitrarily shaped clusters of OD flows (AntScan_flow). In this study, an OD flow cluster is defined as a regional pair with significant log likelihood ratio (LLR), and the ACO is employed to detect the clusters with maximum LLRs in the search space. Simulation experiments based on AntScan_flow and SaTScan_flow show that AntScan_flow yields better performance based on accuracy but requires a large computational demand. Finally, a case study of the morning commuting flows of Beijing residents was conducted. The AntScan_flow results show that the regions associated with moderate- and long-distance commuting OD flow clusters are highly consistent with subway lines and highways in the city. Additionally, the regions of short-distance commuting OD flow clusters are more likely to exhibit ‘residential-area to work-area’ patterns.  相似文献   

高质量增长背景下海洋经济发展的时空协调模式研究——基于环渤海地区地级市的实证   总被引：1，自引：1，他引：0  

狄乾斌  於哲  徐礼祥 《地理科学》2019,39(10):1621-1630

海洋经济协调发展是科学评价区域海洋经济发展质量的重要依据。遵循城市与海洋经济协同的发展理念,构建环渤海城市海洋经济发展时空协调度评价体系,运用复杂系统时空协调度评价模型,计算并分析2008~2016年环渤海城市海洋经济发展时空协调度,通过SaTScan软件分析其时空聚类区。研究结果显示：①海洋经济各系统发展水平中,社会系统呈大幅度分散上升趋势,经济系统、生态系统与综合系统呈小幅度集中与分散交替上升趋势;协调等级时序变化稳定型城市主要是大连、潍坊、青岛、烟台、威海。②协调度时空聚类区既有空间分异又有重叠交集,社会系统、综合系统、经济系统聚类区依次相互覆盖,生态系统与其它三系统既有重叠区也有独立区。③聚类区内部,社会系统最为稳定,综合系统、经济系统次之,生态系统最为薄弱。  相似文献